Skip to main content
Sign in

Changing RTK Streams in the Locusview Mobile App

  • Updated

 

1. Summary

A real-time kinematic (RTK) network sends error corrections from a known point to your GPS unit, ensuring precise location accuracy. These corrections depend on:

  • A strong cellular data signal.

  • A clear view of the sky.

For the best results, connect your GPS unit to an RTK stream sourced nearby. RTK licenses and compatible equipment are required. If credentials or RTK stream details are needed, contact the Locusview Help Desk Team.

This guide provides instructions to connect to an RTK network using the Locusview Mobile App, with information for Gen 2 and Gen 3 devices.

2. Prerequisites

  • RTK license and compatible GPS equipment.

  • RTK credentials, including:

    • Address

    • Port

    • Username (case-sensitive)

    • Password (case-sensitive)

  • Strong cellular data signal and an unobstructed view of the sky.

3. Step-by-Step Instructions

Step 1: Go to the RTK Device Setup Screen

  • Open the Locusview Mobile App.

  • Navigate to the RTK Device Setup screen.

Step 2: Enter RTK Credentials

Enter the credentials provided by the Locusview Help Desk:

  1. Address: Input the address as provided, without spaces.

  2. Port: Enter the port number exactly as provided.

  3. Username: This is case-sensitive; ensure it is entered correctly.

  4. Password: This is case-sensitive; ensure it is entered correctly.

Important: Avoid adding extra spaces, especially at the end of the fields.

Step 3: Connect to the RTK Server

  • After entering all credentials, select Connect to Server.

  • Wait for confirmation of a successful connection.

Step 4: Select the Correct RTK Stream

  • From the Stream List, choose the appropriate stream:

    • If Automatic Selection (or State) is available, prioritize it.

    • If not, select the stream that corresponds to the closest city or state.

Step 5: Save the Stream

  • Tap Save to apply your stream selection.

Step 6: Verify Connection Status

  • Check the map screen bar to confirm the RTK connection status is active.

4. Troubleshooting Tips

  • If the RTK connection fails:

    • Double-check for typos in the Address, Port, Username, and Password fields.

    • Verify a strong internet connection.

    • Ensure the correct stream is selected and saved.

  • If no stream is listed:

    • Confirm the RTK license is active.

    • Contact the Locusview Help Desk for additional support.

5. Additional Notes and Best Practices

  • Always prioritize Automatic Selection or State if available.

  • Select the closest city/state stream if automatic options are unavailable.

  • RTK connections require clear skies for optimal accuracy.

  • Credentials may differ depending on the project or region. Use the provided information accordingly.

 

Related articles